Step 5: Choose your Door/Drawer Styles
Door Designs
Square Doors
D1
Warranty Requirements
• Minimum Width: 7” Flat Panel
• Minimum Width: 7 ½” Raised Panel
• Minimum Height: 7 ½”
• Maximum Height: 50” Per Single Panel
-Two panels recommended on doors over 50” tall
• Maximum Width for Single Door: 20”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
• Door can be built larger than maximum sizes, but warranty against warping will not apply.
Two Equal Panel Doors
D2
Warranty Requirements
• Minimum Width: 7 ½”
• Minimum Height: 24”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
• Center Rail Standard Width: 2 ½”
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
• Center rail width may be specified.
• Door will be built with equal sized panel.
Two Panel Door 1/3 Top, 2/3 Bottom
D3
Warranty Requirements
• Minimum Width: 7 ½”
• Minimum Height: 30”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
• Center Rail Standard Width: 2 ½”
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
• Door will be built with total panel space available 1/3 to top and 2/3 to bottom.
• Door can be built with a specific panel height. Must be clearly marked on order form in the Special Notes Area.
Two Equal Panels Side by Side Door
D4
Warranty Requirements
• Minimum Width: 12”
• Minimum Height: 8”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
• Center Rail Standard Width: 2 ½”
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
Two Equal Panels Side by Side Door Thin Center Rail
D5
Warranty Requirements
• Minimum Width: 11 ½”
• Minimum Height: 8”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
• Center Rail Standard Width: 1 ½”
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
Three Panels 1/3, 2/3 Door
D6
Warranty Requirements
• Minimum Width: 12”
• Minimum Height: 24”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
• Center Rail Standard Width: 2 ½”
• Center Stile Standard Width: 2 ½”
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
• Specify top panel height if other than 1/3.
**Must be clearly marked on order form in the Special Notes Area.
Arched Doors
D7
Oval
Warranty Requirements
• Minimum Width: 10”
• Minimum Height: 10”
• Stile Standard Width: 2 ½”
• Bottom Rail Standard Width: 2 ½”
• Top Rail Standard/Minimum: 4 ¼”
**If taller Top Rail is needed, it must be clearly marked in the Special Notes Area of the Order
Form.
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
Crown
Double Arch Doors
D8
Oval
Warranty Requirements
• Minimum Width: 10”
• Minimum Height: 10”
• Stile Standard Width: 2 ½”
• Bottom Rail Standard Width: 2 ½”
• Top Rail Standard/Minimum: 4 ¼”
**If taller Top Rail is needed, it must be clearly marked in the Special Notes Area of the Order
Form.
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
Crown
Tall Double Panel Top Arch Doors
D9
Oval
Warranty Requirements
• Minimum Width: 10”
• Minimum Height: 14”
• Stile Standard Width: 2 ½”
• Bottom Rail Minimum Width: 2½”
• Top Rail Standard/Minimum Width: 4 ¼”
**If taller Top Rail is needed, it must be clearly
marked in the Special Notes Area of the Order
Form.
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
Crown
1/3-2/3 Arch Panel Doors
D10
Oval
Warranty Requirements
• Minimum Width: 10”
• Minimum Height: 30”
• Stile Standard Width: 2 ½”
• Bottom Rail Standard Width: 2 ½” ”
• Top Rail Standard/Minimum Width: 4 ¼”
**If taller Top Rail is needed, it must be clearly
marked in the Special Notes Area of the Order
Form.
Build Options
• Panel Options: Any Available
• Inside Edge Options: Any Available
• Specify top panel height if other than 1/3.
**Must be clearly marked on order form in the
Special Notes Area.
Crown
Glass Ready Doors
All glass doors allow for single glass pane (not supplied).
Single Lite
GL19
Warranty Requirements
• Minimum Width: 7 ½”
• Minimum Height: 7 ½”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½” ”
• Inside Edge Options: Any Available
4 Lite
GL20
Warranty Requirements
• Minimum Width: 13”
• Minimum Height: 14”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½” ”
• Mullions: 7/8” – 1 1/8” depending on IE
• Not all IE available with matching mullions
6 Lite
GL21
Warranty Requirements
• Minimum Width: 12”
• Minimum Height: 22”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½” ”
• Mullions: 7/8” – 1 1/8” depending on IE
• Not all IE available with matching mullions
8 Lite
GL22
Warranty Requirements
• Minimum Width: 12”
• Minimum Height: 32”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
• Mullions: 7/8” – 1 1/8” Depending on IE
• Not all IE available with matching mullions.
9 Lite
GL23
Warranty Requirements
• Minimum Width: 16”
• Minimum Height: 22”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½” ”
• Mullions: 7/8” – 1 1/8” Depending on IE
• Not all IE available with matching mullions.
Drawer Front Designs
Solid Wood Slab
DF1
{Horizontal grain left to right.}
Warranty Requirements
• Minimum Width: 4”
• Minimum Height: 2”
• Maximum Height: 12”
• Will build taller, but no warranty will apply.
**Single board will be used on widths up to 6”. Taller than
6” will be laminated to help prevent warping or cupping.
(Paint grade may be laminated at smaller widths.)
Upper Drawer
DF2
{Horizontal grain left to right.}
Warranty Requirements
• Minimum Width: 4”
• Minimum Height: 2”
• Maximum Height: 12”
• Will build taller, but no warranty will apply.
**Single board will be used on widths up to 6”. Taller than
6” will be laminated to help prevent warping or cupping.
(Paint grade may be laminated at smaller widths.)
DF3
{Horizontal grain left to right.}
Warranty Requirements
• Minimum Width: 7”
• Minimum Height: 6” Flat Panel (FP)
• Minimum Height: 7” Raised Panel (RP) or Reversed Panel (RRP)
• Maximum Height: 11”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2”
Build Options
• Panel Options: Any that does not require vertical grain
• Will build taller, but no warranty will apply.
DF4
{Horizontal grain left to right.}
Warranty Requirements
• Minimum Width: 7”
• Minimum Height: 7” Flat Panel (FP)
• Minimum Height: 8” Raised Panel (RP) or Reversed
Panel (RRP)
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
Build Options
• Panel Options: Any that does not require vertical grain.
• Will build taller, but no warranty will apply.
DF2V
{Vertical grain left to right}
Warranty Requirements
• Minimum Width: 7”
• Minimum Height: 5” Flat Panel (FP)
• Minimum Height: 6” Raised Panel (RP) or Reversed
Panel (RRP)
• Maximum Height: 8”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 1 ½”
Build Options
• Panel Options: Any available.
• Will build taller, but no warranty will apply.
DF3V
{Vertical grain left to right}
Warranty Requirements
• Minimum Width: 7”
• Minimum Height: 6” Flat Panel (FP)
• Minimum Height: 7” Raised Panel (RP) or Reversed
Panel (RRP)
• Maximum Height: 11”
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2”
Build Options
• Panel Options: Any available.
• Will build taller, but no warranty will apply.
DF4V
{Vertical grain left to right}
Warranty Requirements
• Minimum Width: 7”
• Minimum Height: 7” Flat Panel (FP)
• Minimum Height: 8” Raised Panel (RP) or Reversed
Panel (RRP)
• Stile Standard Width: 2 ½”
• Rail Standard Width: 2 ½”
Build Options
• Panel Options: Any available.
